適用范圍 Applicable scope

       本缺相、相序保護器是一種應用大規模數字集成電路、無變壓器設計的新型高科技專利產品(獨家生產，如有雷同純屬仿冒)。通用性強(3Ph 220V～380V、460V～660V 50Hz/60Hz均可使用)，體積超小，外觀非常漂亮，是取代施耐德相序保護器(RM4-TG20)、ABB、西門子、歐姆龍(OMROM)及其它國產相序保護器(XJ3、XJ5...系列)最理想的產品。

       The missing phase and phase sequence protector is a new high-tech patented product with large scale digital integrated circuit and no transformer esign.Production, if any, is a knockoff. Strong universality (3Ph 220V ~ 380V, 460V ~ 660V 50Hz/60Hz can be used), body.The product is very small and very beautiful. It is the replacement of the schneider phase protector (rm4-tg), ABB, Siemens, omron (OMROM).And other domestic phase sequence protectors (XJ3, XJ5... Series) ideal product.

保護特點 Characteristics of protection

1.動態缺相、靜態缺相保護：指被保護設備在運行狀態或非運行狀態時，任意一相發生斷相故障。指示燈形式為：紅燈亮，并優先；

2.錯相保護：防止L1、L2、L3三相交流電源相序接錯的一種保護措施。即時動作。指示燈形式為：黃燈亮；

3.電壓不平衡保護：指三相電壓不平衡將會影響設備安全運行的一種電壓不平衡率的保護。電壓不平衡率高于8%時。指示燈形式為：缺相紅燈亮，并優先；

4.延時保護：有故障出現時監視器延時1~2秒后動作，繼電器釋放；

1. Dynamic missing phase and static lack of phase protection: when the protected equipment is in operation or non-operating state, any phase failure occurs. Refers to theThe lamp form is: red light, and priority;

2. False protection: one kind of protection measures to prevent the communication power supply in L1, L2 and L3. Instant action. The indicator light is yellow.The light;

3. Voltage imbalance protection: the protection of a voltage unbalance rate that will affect the safe operation of the equipment will be affected by the unbalanced three-phase voltage. Voltage imbalanceThe rate is above 8%. The indicator light is in the form of: absence of red light, and priority;

4. Delay protection: the monitor is delayed for 1~2 seconds after the failure occurs, and the relay is released;

性能特點 Characteristics of performance

1.監視器的保護功能不受線路或負載的電流大小，沖擊電流、不平衡電流和負載性質的影響。能夠全性能、全氣候長期工作。功耗不大于2W；

2.用于電機保護時對電機接線方式無要求；

3.本產品符合GB/T 14048.1-2000、GB14048.5-2001 eqv IEC60947-1:1999；

4.本產品的EMC符合GB4343-1995的無線電干擾特性測量方法和允許值。

1. The protection function of the monitor is not affected by the current size of the circuit or load, impact current, unbalanced current and load nature. Can all sexAbility to work long term. The power consumption is not greater than 2W;

2. No requirement for motor connection mode when used for motor protection;

3. The product conforms to GB/T 14048.1-2000, GB14048.5-2001 eqv iec60947-1:99;

4. The EMC of this product conforms to the measurement method and allowable value of GB4343-1995 radio interference characteristics.